Multiplex Funjet Clone! |
|
In July 2021, YouTube set all unlisted videos uploaded before 2017 to private (unless the channel owner had opted out). In the weeks leading up to this change, Archive Team archived many pre-2017 unlisted YouTube videos. If this video was uploaded before 2017 and has gone private, there is a chance that a 360p archived version can be viewed on archive.org via the site's Wayback Machine as follows: 1. Enter the YouTube URL in the Wayback Machine form or click on the following link: https://web.archive.org/web/20210000000000*/https://www.youtube.com/watch?v=YQaKn_cYAQQ 2. Right-click on a blue entry in July in the calendar. 3. Click 'Copy link address'. 4. Paste the copied link address into your web browser's address bar and press enter.
Description: BUILD VIDEO: http://www.youtube.com/watch?v=PlsdWah1wIs This is my Multiplex Funjet Ultra clone. It has a KFm4 airfoil and a 30 inch wingspan. The white foam is dollar tree foamboard and the pink foam is 1/2 inch wall insulation foamboard from Home Depot. Wingspan: 30 inch Fuselage Length: 24.5 inches Fuselage Width: 2.5 inches (widens to 3 inches infront of fuselage) Elevons: 7 inches x 2 inches (begin 2.5 inches in from edge of wing) I realized while writing this that it is hard to explain in words how to make this. Let me know if you guys want a video about the construction of this plane and I will make one! Motor: Grayson Hobby Microjet V3 Prop: 6x4 APC ESC: 30A Exceed RC Battery: 1550 mAh 3S 11.1v GensAce Lipo Servos: Turnigy 9-gram Rx: OrangeRx 6 channel Tx: DX7se 
|
