FPV40xl Build Instructions |
In July 2021, YouTube set all unlisted videos uploaded before 2017 to private (unless the channel owner had opted out). In the weeks leading up to this change, Archive Team archived many pre-2017 unlisted YouTube videos. If this video was uploaded before 2017 and has gone private, there is a chance that a 360p archived version can be viewed on archive.org via the site's Wayback Machine as follows: 1. Enter the YouTube URL in the Wayback Machine form or click on the following link: https://web.archive.org/web/20210000000000*/https://www.youtube.com/watch?v=Avf9wYNyb_M 2. Right-click on a blue entry in July in the calendar. 3. Click 'Copy link address'. 4. Paste the copied link address into your web browser's address bar and press enter.
Description: Quick tutorial for the FPV40 and FPV40xl. Not a complete build video, but I show you all that you need to know to build it. This wing features a KFm2 airfoil made from 1/2 inch pink wall insulation foamboard and the base of the wing in made from a single 20"x30" sheet of foamboard from the Dollar Tree. Please refer to my Delta Pusher Build video for more details about how I build my wings, the exact same techniques are used to build the FPV40 and the FPV40xl. FPV40 Wing area 420 in^2 CG - 8.25" back from nose Wing span - 40, root chord - 13, tip chord - 8, sweep - 14 Make markings up both sides at - 0", 2", 8", 20", 22" FPV40xl Wing area 480 in^2 CG - 8.75" back from nose Wing span - 40, root chord - 13, tip chord - 10, sweep - 14 Make markings up both sides at - 0", 8", 21", 23" and that mark at 4 3/8" on the adjacent side Thanks to Experimental Airlines for the motor mount and fuselage ideas, links to his videos: Fuselage - https://www.youtube.com/watch?v=Xafg-o83L94&feature=g-user-u Motor Mount - https://www.youtube.com/watch?v=JNWwgOYBfjs&feature=plcp |